Smart WiFi Thermostat Fan Coil Unit 230V 3-Speed Fan LCD Touch Heat Cool Gold
$22.99$45.99
You save $23.00 (50%) — sale already applied
Condition: Open box · approx. 1.5 lb packed
✓ In stock — 1 available
Condition note from our inspection: Open box. 230V LINE-VOLTAGE fan coil unit thermostat - rating plate reads AC230V 50/60Hz 3A. NOT compatible with standard US 24V low-voltage HVAC systems. Light scratches on the LCD window and face plate (see photos). No box, manual, screws or accessories - thermostat unit only. Ships fast with tracking. 30 Day Return Store Policy.
🚚 Shipping: $5.50 (weight-based flat rate; a whole order never ships for more than $35).
Ships from Mesa, AZ within 1 business day · estimated delivery 3–7 business days (continental US).
↺ Returns: Buyer Pays Return Ship within 30 days.
🧾 Sales tax for your state is added at checkout after you enter your address.
Smart WiFi Fan Coil Unit (FCU) Thermostat — 230V Line Voltage, 3-Speed Fan, Gold LCD Touch Panel
A WiFi-enabled digital room thermostat built to control a fan coil unit in a central air-conditioning system. It drives a three-speed fan and separate heating and cooling valves, and shows room temperature, mode, fan speed and clock on a backlit LCD behind a gold touch panel.
IMPORTANT — PLEASE READ BEFORE BUYING
This is a 230V LINE-VOLTAGE thermostat. The rating plate on the back of this actual unit reads "AC230V 50/60Hz, current Imax: 3A, IP20". Photo 4 shows that plate.
It is NOT a 24V low-voltage thermostat. Standard North American residential furnace/AC systems use 24VAC control wiring, and this thermostat will not work with them.
It is intended for fan coil units (hydronic / chilled-water FCU systems), which is where 230V thermostats of this style are normally used.
Markings on the unit are CE only — there is no UL or ETL listing mark. Installation should be done by a qualified electrician and must comply with your local electrical code.
Some marketplace listings for this style of thermostat quote a wider "AC90-240V" range. We are going by what is printed on this unit, which is 230V.
Wiring Terminals (photographed on this unit)
Nine screw terminals, labelled:
L, N — 230V line and neutral supply
Hi, Med, Low — three-speed fan outputs
VO / VC (HEAT) — heating valve open / close
VO / VC (COOL) — cooling valve open / close
Key Features
WiFi / smart control — monitor and adjust the temperature remotely from a phone app
Four fan modes — automatic, high, medium and low speed
LCD display showing room temperature, heating or cooling mode, fan speed and clock
Capacitive touch keys — power, SET, fan, up and down
Built-in temperature sensor, control range approximately 5°C–35°C, with strong anti-interference
Max load 3A · IP20 · 50/60Hz · square wall-plate form factor
Gold / champagne face plate with white surround
Condition — Please Read
Open box. The unit is in good used-open-box condition and shows light scratching and marks on the LCD window and face plate, visible in photos 2 and 3. It is sold as-is with no original box, no manual and no mounting screws or accessories — you are buying the thermostat unit shown in the photos only. Please review all photographs, including the rear terminal plate, before purchasing.
What’s Included
1 x WiFi fan coil unit thermostat (the item pictured) — nothing else
Shipping & Returns
Ships fast from Mesa, Arizona with tracking. 30-day returns accepted.
